- Gauteng
- Salary: Market Related
- Job Type: Contract
- Sectors: Warehousing
- Reference: 2178359
Vacancy Details
Employer: Dynamic Outsourced Solutions Pty. Ltd
Job Family: Operations
Set up, operate, or tend machines to extrude or draw thermoplastic or metal materials into tudes, rods, hoses, wire, bars, or structural shapes. |
Conduct work within the area and scope of training; or is required to exercise a limited degree of discretion or judgement that may become automatic with practical experience. Employee works under direct supervision or functions as a member of a work team. Understands and uses basic statistical process control procedures, including the measurement of output specifications; and consistently meets the production and quality standards set for activities at this level.
Required Skills
- Extruder: 3 to 4 years
- Extruding Operator: 3 to 4 years
Candidate Requirements
· Responsible and accountable for the quality of the product.
· Check raw materials (conductors and plastics) for defective items before use and report same to supervisor.
· Do all tests and inspections according to the Test Methods, product test plans and visuals.
· Immediately after each reel is completed, take and identify a sample. Do tests and inspections according to the Test Methods test plan and visuals at the satellite lab.
· At the start of each new run, take a sample and check product carefully for defects under the microscope and check concentricity on every batch/reel.
· Record the results of all tests done and store the identified sample in a marked/dated sample box.
· Take marked/dated sample box with identifies samples to lab.
Strip and re-test cable if needed.
· Operate automatic Wire Drawer machine.
· Operate automatic Sheathing Extruder machine.
· Check Wire Drawer lubricant.
· Keep dies lubricated at all times.
· Always ensure correct suds are used.
· Check flaking on take-up reel.
· Must avoid lengthy stoppages that will burn plastic in the extruder.
· Leave the extruder empty of plastic – over long shutdowns or if no further shift required.
Shut down the line when needed if product is out of specified sizes, elongation etc. and report to Shift Supervisor.
Required skills:
- General mechanical abilities.
- Moderate skills with hand tools.
-
Required experience:
Specific on-the-job training for the M1 dual line machine.
Mechanical engineering experience.
9 people have applied for this job. 342 people have viewed this job.
Similar Jobs
MULTI LINE EXTRUDER
- Gauteng
- Job Type: Contract
- Posted 04 Sep 2024 | 29 Days left
MULTI LINE EXTRUDER
- Gauteng
- Job Type: Contract
- Posted 07 Oct 2024 | 62 Days left
Operator: Multi Line Extruder
- Centurion
- Job Type: Permanent
- Posted 19 Aug 2024 | 12 Days left
More Jobs at Dynamic Outsourced Solutions Pty. Ltd
CABLE EXTRUDER
- Gauteng
- Job Type: Contract
- Posted 07 Oct 2024 | 62 Days left
MULTI LINE EXTRUDER
- Gauteng
- Job Type: Contract
- Posted 07 Oct 2024 | 62 Days left
EXTRUDER - CENTURION
- Gauteng
- Job Type: Contract
- Posted 07 Oct 2024 | 62 Days left
GENERAL WORKERS - PAARL
- Paarl
- Job Type: Temporary
- Posted 03 Oct 2024 | 58 Days left